Robotic Mount 1 Ton Marker

Printer Friendly Manual Quote

Robotic Mounted Air Impact Marker: Model 75S & 85S

Model 75S and 85S: Compact and lightweight in design, these single action air hammers are pressure activated. Mount onto robotic arm and present to part, or vice-a-versa. The force required for actuation is equivalent to the air pressure being used.

Features:

Two basic styles of this air hammer look identical. The internal difference offers two power ranges. The maximum marking pressure for the model 75S is 1500 at 80 psi, and the maximum marking pressure of the model 85S is 2500 at 80 psi.

Robotic Mount 1 Ton Marker, front and rear views

Four bolt holes are located at the back of the marker for easy installation. (4) 5/16” tap x .62" deep equally spaced on a 1.562” B.C.
3 Standard rod styles to hold the stamps offer multi-character OA or OAS38, and single character OB.
Each system offers a choice of air port connections. One is located on the back of the cylinder and one is located on the side of the cylinder. With these ¼ NPT connections CMT recommends the use of 3/8” airline. Use of a filter and lubricator is also recommended.

Technical Specifications

Robotic mount 1 ton air impact marker rod styles

Recommended Air Hose: 3/8” I.D. minimum
Operating Pressure: 20 to 100 psi
Max. Marking Pressure: Model 75S is 1500 lbs. (at 80 psi), Model 85S is 2500 lbs. (at 80 psi)
Stamp Capacities Rod Style “B”
(1) Pc CM8X round insert 1/16” t0 1/4” character. Multi-character insert available for smaller character sizes.
Stamp Capacities Rod Style “A”
(4) Pc’s 1/16 Char. CMG06 Stamp Inserts
(2) Pc’s 1/8 Char. CMG13 Stamp Inserts
Stamp Capacities Rod Style “AS38”
(6) Pc’s 1/16 Char. CMG06 Stamp Inserts (3) Pc’s 1/8 Char. CMG13 Stamp Inserts

Model 75S and 85S How to Order Chart

Feature	Symbol	Example
75S Lower power 85S Higher power	075S 085S	085S-OA
Rod Style “B” single character Rod Style “A” multi-character Rod Style “AS38” multi-character	OB OA OAS38

Hand Stamps to Lasers