Numbering Heads for Air Impact Markers

• Manually sequenced and automatically sequenced wheels. Automatic wheels require actuation device.
• Patented pawl system for easy setting and positive alignment.
• Sturdy one piece frames.
• Large diameter main shaft for bearing load.
• Standard character sizes include: 1/16”, 3/32”, 1/8”, 5/32”, 3/16”, and ¼”. Metric sizes available upon request.

• Standard wheels 10 stations reading 0 through 9.
• Custom wheels include alpha and symbols readings, and 12 and 14 station wheels.

Styles: 130K for manual changing of the numbers, and 123K for automated incremental serialization of the numbers
Number of Manual Wheels:  Number of manual  wheels in the numbering head
Number of Automatic Wheels:  Only available on the model 123K. These automated wheels start from the right side of the marking legend (as read).
Character Size:  Size of characters on the wheels, all standard wheels reading 0 to 10. Optional readings available.
Actuator: Pneumatic actuator is used to sequence the incremental numbers and requires second 4-way valve to cycle. Only available on the model 123K.
Approval: Complete approval drawings will be provided upon placement or order, and require customer approval to proceed.
Pressure Required: Numbering head configurations may require more force than provided by Slide-A-Mark. Please check pressure charts for verification.

130K Manual Numbering Head
123K Automatic Numbering Head

130K
123K

No Manual wheels
1 Manual wheel
2  Manual  wheels
3  Manual  wheels
4  Manual  wheels
5 Manual wheels

-
1M
2M
3M
4M
5M

No Automatic Wheels (for 130K)
1 Automatic wheel
2 Automatic wheels
3 Automatic wheels
4 Automatic wheels
5 Automatic wheels

-
1A
2A
3A
4A
5A

1/16” character size
3/32” character size
1/8” character size
3/16” character size
1/14” character size

06
09
13
19
25

Actuator
No Actuator

A
0